The 61Q6-31310 is a pin and retainer for 14 Ton Excavator buckets, produced in our own foundry and machining line from 40Cr Alloy Steel and hardened to HRC 48-52. It is built for landscaping and golf course shaping, where a pin that wears oval or cracks at the groove stops the machine and costs a shift.
Landscaping work on 14 ton class machines uses tilt and grading buckets that are changed frequently. The pin is light, 28 mm by 160 mm, and the kit includes the retainer so a change can be done with one spanner and a hammer. Finish is black oxide; if the site is coastal, ask us to plate it instead.
Bucket Tooth Pin Retainer are often quoted by part number alone, but the working environment decides the right version. For landscaping and golf course shaping, 61Q6-31310 in 40Cr Alloy Steel at HRC 48-52 is the standard recommendation. For wet or coastal sites choose zinc plating, and for high shock rock work ask about our deeper case hardness option.
61Q6-31310 ships as a pin and retainer: 28 x 160mm pin, 0.38 kg, plus the matching retainer. Neutral carton, part number label, no third party branding anywhere in the pack.
Fitting a retainer from a different series, hammering the pin in dry, or reusing a stretched retainer are the three causes we see most often in warranty claims. All three are avoidable with a two minute check at installation.
61Q6-31310 is dimensioned as a pin and retainer for 14 Ton Excavator buckets working in landscaping and golf course shaping. The table below lists the primary number and the interchange references we ship against most often. Where a machine has been re-pinned or the bucket rebuilt, always check the bore diameter and groove position on the old part before ordering.
Two dimensions decide whether a pin lasts a month or a season: body diameter against the tooth bore, and groove width against the retainer. We hold both on our own machining line rather than buying finished pins on the open market, so a repeat order keeps the same fit as the first shipment.
Replace when the body shows a step of more than 1 mm, when the groove has widened enough for the retainer to rotate, or when the head shows cracks. Running a worn pin transfers wear into the tooth bore and adapter, which is a far more expensive repair.
| Part Number | 61Q6-31310 |
| Product Type | Pin and Retainer |
| Material | 40Cr Alloy Steel |
| Hardness | HRC 48-52 |
| Pin Diameter | 28 mm |
| Pin Length | 160 mm |
| Net Weight | 0.38 kg |
| Machine Class | 14 Ton Excavator |
| Surface Finish | Black Oxide |
| Application | landscaping and golf course shaping |
| Warranty | 6 months against casting and heat treatment defects |
| Minimum Order | 10 pieces |
| Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 61Q6-31310 | Primary number |
| 61N8-31310 | Interchange reference, verify against sample before ordering |
| R140 series | Interchange reference, verify against sample before ordering |
| E161-3034 | Interchange reference, verify against sample before ordering |
Pins are oiled against transit rust, individually wrapped, and labelled with the part number and lot. Cartons are export grade corrugated, palletised and fumigation free. Nothing in the pack carries a third party brand, logo or artwork, so the goods can be resold under your own label. Loading is from Ningbo or Guangzhou, with CIF and DDP quotes available.
Can you produce from our drawing?
Yes. Send a drawing or sample and we will confirm material, tolerance and heat treatment, then quote for OEM production with your part number marked.
What is the lead time for 500 pieces?
Stock sizes ship in 3-7 days. Made to order quantities of 500 pieces run about 20-25 days after drawing confirmation and deposit.
How do you control hardness?
Every heat is checked by spectrometer, then pins are sampled for Rockwell hardness at the head, body and groove. 61Q6-31310 is held within HRC 48-52.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.