205-939-7120-45 Bucket Adapter Pin, 45 x 265mm, 42CrMo Alloy Steel, HRC 50-55. This is the pin used on 20 Ton Excavator buckets in hard rock ripping and frost cutting. Buyers replace it as a scheduled wear item, so repeatability of dimension and hardness matters more than a single low price.
Frost cutting and hard rock ripping load the adapter joint in a way that standard digging does not: high impact at low temperature. 205-939-7120-45 increases the section to 45 mm in 42CrMo at HRC 50-55 to suit that duty. Where the machine runs a standard 40 mm adapter pin, keep both sizes in stock so the crew is not tempted to force the wrong part.
Repeatable fit. 205-939-7120-45 is machined to the same drawing on every batch, so a second order drops into the same bore without reaming or shimming.
Hardness matched to duty. HRC 50-55 in 42CrMo Alloy Steel for hard rock ripping and frost cutting. Too hard and the pin cracks at the groove, too soft and it wears oval within weeks. This grade is the balance point for 20 Ton Excavator buckets.
Groove geometry. The retainer seat is machined after heat treatment, not before, which keeps groove width stable and stops the retainer working loose.
Traceable lots. Part number laser marked, lot identified on the carton, inspection report on request. Useful when you supply fleets under contract.
Pin size 45 x 265mm, weight 1.85 kg, finish black oxide, primary number 205-939-7120-45, machine class 20 Ton Excavator, application hard rock ripping and frost cutting.
Most of our distributor customers combine this number with teeth, adapters and retainers in a single container. Send the full list and we will confirm weights, carton counts and a single FOB price for the mixed load.
205-939-7120-45 is dimensioned as a adapter pin for 20 Ton Excavator buckets working in hard rock ripping and frost cutting. The table below lists the primary number and the interchange references we ship against most often. Where a machine has been re-pinned or the bucket rebuilt, always check the bore diameter and groove position on the old part before ordering.
Two dimensions decide whether a pin lasts a month or a season: body diameter against the tooth bore, and groove width against the retainer. We hold both on our own machining line rather than buying finished pins on the open market, so a repeat order keeps the same fit as the first shipment.
Replace when the body shows a step of more than 1 mm, when the groove has widened enough for the retainer to rotate, or when the head shows cracks. Running a worn pin transfers wear into the tooth bore and adapter, which is a far more expensive repair.
| Reference No. | 205-939-7120-45 |
| Part Category | Adapter Pin |
| Body Material | 42CrMo Alloy Steel |
| Hardness Range | HRC 50-55 |
| Pin Size (Dia) | 45 mm |
| Pin Size (Length) | 265 mm |
| Unit Weight | 1.85 kg |
| Fits Machine Class | 20 Ton Excavator |
| Finish Type | Black Oxide |
| Working Application | hard rock ripping and frost cutting |
| Warranty Term | 6 months against casting and heat treatment defects |
| MOQ | 10 pieces |
| Export Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 205-939-7120-45 | Primary number |
| 205-939-7120-40 | Interchange reference, verify against sample before ordering |
| 939-7120 | Interchange reference, verify against sample before ordering |
| PC200 series | Interchange reference, verify against sample before ordering |
Standard export packing: oiled pin, inner wrap, part number label, corrugated carton, pallet. Neutral presentation throughout, no third party brand or logo anywhere in the shipment. Port of loading is Ningbo or Guangzhou; we can also quote CIF and DDP so the landed cost is clear before you commit.
Which surface finish should I choose?
Black oxide suits most dry abrasive conditions, zinc plating suits wet or coastal sites, painted golden finish is common for mini and mid size machines. Tell us the working environment and we will advise.
Do you supply pins for loaders as well?
Yes, we produce excavator, loader and backhoe bucket pins and retainers, from mini class up to 40 ton mining class.
How are the pins marked?
The part number is laser marked on the head. No third party brand name or logo is applied at any stage.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.