This page covers 4196846, a tooth pin for 25 Ton Excavator buckets. Body material is 40Cr Alloy Steel at HRC 48-52, pin size 38 x 220mm, net weight 0.98 kg. Typical duty is river dredging and silt removal, where abrasive fines and shock loading attack the pin groove first.
Dredging combines wet abrasive conditions with continuous immersion, so corrosion pitting accelerates fatigue. 4196846 is zinc plated to limit that pitting, with a 38 mm body for 25 ton class dredging buckets. Where the machine works in salt or brackish water, we recommend shortening the inspection interval to 150 hours.
Contractors running 25 Ton Excavator machines in river dredging and silt removal tell us the two failure patterns that matter are oval wear in the body and loosening of the retainer. 4196846 addresses both: the body diameter is held tight to the tooth bore, and the retainer groove is cut after heat treatment so its width does not change when the pin is hardened.
The numbers listed below are the references we ship against most often for this size. They are supplied as compatibility information only, so the buyer can confirm the match against the machine serial or the old part.
Regular sizes are held in stock for shipment within 3-7 working days. Non stock sizes and OEM production run 20-25 days from drawing confirmation. Minimum order 10 pieces per size, mixed sizes allowed.
Excavator Tooth Pin are often quoted by part number alone, but the working environment decides the right version. For river dredging and silt removal, 4196846 in 40Cr Alloy Steel at HRC 48-52 is the standard recommendation. For wet or coastal sites choose zinc plating, and for high shock rock work ask about our deeper case hardness option.
4196846 ships as a tooth pin: 38 x 220mm pin, 0.98 kg, plus the matching retainer. Neutral carton, part number label, no third party branding anywhere in the pack.
Fitting a retainer from a different series, hammering the pin in dry, or reusing a stretched retainer are the three causes we see most often in warranty claims. All three are avoidable with a two minute check at installation.
| P/N | 4196846 |
| Item Type | Tooth Pin |
| Steel Grade | 40Cr Alloy Steel |
| Hardness | HRC 48-52 |
| Diameter | 38 mm |
| Overall Length | 220 mm |
| Weight | 0.98 kg |
| Class Fitment | 25 Ton Excavator |
| Coating | Zinc Plated |
| Duty | river dredging and silt removal |
| Warranty | 6 months against casting and heat treatment defects |
| Minimum Order Quantity | 10 pieces |
| Packing Method | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 4196846 | Primary number |
| 4196847 | Interchange reference, verify against sample before ordering |
| EX300 series | Interchange reference, verify against sample before ordering |
| 4652262 | Interchange reference, verify against sample before ordering |
Each pin leaves the line oiled, wrapped and labelled, consolidated into export corrugated cartons on a fumigation free pallet. Packing is deliberately neutral, with no third party brand name, logo or printed artwork, which keeps the goods clean for resale. FOB Ningbo or Guangzhou as standard, CIF and DDP on request.
How do I confirm the pin fits my machine?
Send the machine model, bucket part number or a photo of the old pin with its length and diameter. We will cross check the 4196846 against our fitment data before you order.
Is the pin supplied with the retainer?
Yes, 4196846 is supplied as a tooth pin kit. If you only need the pin or only the retainer, state this in the inquiry and we will quote separately.
What is the packing like?
Neutral carton with no third party logo. Each pin is wrapped and part number labelled, and the carton is export grade corrugated suitable for sea freight.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.