9J2258 Loader Bucket Tooth Pin Retainer, 30 x 170mm, 45# Carbon Steel, HRC 45-50. This is the pin used on 20 Ton Wheel Loader buckets in aggregate yard and sand stockpile loading. Buyers replace it as a scheduled wear item, so repeatability of dimension and hardness matters more than a single low price.
Loader buckets in aggregate yards run long shifts at moderate load. The pin is not usually fatigue limited, it is simply replaced with the tooth. 9J2258 is priced and packed for that routine: 30 mm 45# steel at HRC 45-50, retainer included in the same carton, minimum order 10 pieces. Yards typically order 50 to 200 pieces at a time to cover a season.
Repeatable fit. 9J2258 is machined to the same drawing on every batch, so a second order drops into the same bore without reaming or shimming.
Hardness matched to duty. HRC 45-50 in 45# Carbon Steel for aggregate yard and sand stockpile loading. Too hard and the pin cracks at the groove, too soft and it wears oval within weeks. This grade is the balance point for 20 Ton Wheel Loader buckets.
Groove geometry. The retainer seat is machined after heat treatment, not before, which keeps groove width stable and stops the retainer working loose.
Traceable lots. Part number laser marked, lot identified on the carton, inspection report on request. Useful when you supply fleets under contract.
Pin size 30 x 170mm, weight 0.55 kg, finish zinc plated, primary number 9J2258, machine class 20 Ton Wheel Loader, application aggregate yard and sand stockpile loading.
Most of our distributor customers combine this number with teeth, adapters and retainers in a single container. Send the full list and we will confirm weights, carton counts and a single FOB price for the mixed load.
Loader Bucket Tooth Pin Retainer are often quoted by part number alone, but the working environment decides the right version. For aggregate yard and sand stockpile loading, 9J2258 in 45# Carbon Steel at HRC 45-50 is the standard recommendation. For wet or coastal sites choose zinc plating, and for high shock rock work ask about our deeper case hardness option.
9J2258 ships as a pin and retainer: 30 x 170mm pin, 0.55 kg, plus the matching retainer. Neutral carton, part number label, no third party branding anywhere in the pack.
Fitting a retainer from a different series, hammering the pin in dry, or reusing a stretched retainer are the three causes we see most often in warranty claims. All three are avoidable with a two minute check at installation.
| P/N | 9J2258 |
| Item Type | Pin and Retainer |
| Steel Grade | 45# Carbon Steel |
| Hardness | HRC 45-50 |
| Diameter | 30 mm |
| Overall Length | 170 mm |
| Weight | 0.55 kg |
| Class Fitment | 20 Ton Wheel Loader |
| Coating | Zinc Plated |
| Duty | aggregate yard and sand stockpile loading |
| Warranty | 6 months against casting and heat treatment defects |
| Minimum Order Quantity | 10 pieces |
| Packing Method | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 9J2258 | Primary number |
| 8E6358 | Interchange reference, verify against sample before ordering |
| J250 series | Interchange reference, verify against sample before ordering |
| 9J2259 | Interchange reference, verify against sample before ordering |
Standard export packing: oiled pin, inner wrap, part number label, corrugated carton, pallet. Neutral presentation throughout, no third party brand or logo anywhere in the shipment. Port of loading is Ningbo or Guangzhou; we can also quote CIF and DDP so the landed cost is clear before you commit.
Which surface finish should I choose?
Black oxide suits most dry abrasive conditions, zinc plating suits wet or coastal sites, painted golden finish is common for mini and mid size machines. Tell us the working environment and we will advise.
Do you supply pins for loaders as well?
Yes, we produce excavator, loader and backhoe bucket pins and retainers, from mini class up to 40 ton mining class.
How are the pins marked?
The part number is laser marked on the head. No third party brand name or logo is applied at any stage.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.