The 207-939-5120 is a adapter pin for 30 Ton Excavator buckets, produced in our own foundry and machining line from 40Cr Alloy Steel and hardened to HRC 48-52. It is built for limestone quarry and cement plant feed, where a pin that wears oval or cracks at the groove stops the machine and costs a shift.
Limestone quarry buckets work on a steep face with heavy breakout and constant fines. The adapter pin takes the load path between tooth and adapter nose, so the 50 mm body on 207-939-5120 is machined with a groove profile that matches the adapter bore rather than a generic radius. Painted golden finish is standard on this line for easy inspection.
207-939-5120 is dimensioned as a adapter pin for 30 Ton Excavator buckets working in limestone quarry and cement plant feed. The table below lists the primary number and the interchange references we ship against most often. Where a machine has been re-pinned or the bucket rebuilt, always check the bore diameter and groove position on the old part before ordering.
Two dimensions decide whether a pin lasts a month or a season: body diameter against the tooth bore, and groove width against the retainer. We hold both on our own machining line rather than buying finished pins on the open market, so a repeat order keeps the same fit as the first shipment.
Replace when the body shows a step of more than 1 mm, when the groove has widened enough for the retainer to rotate, or when the head shows cracks. Running a worn pin transfers wear into the tooth bore and adapter, which is a far more expensive repair.
Contractors running 30 Ton Excavator machines in limestone quarry and cement plant feed tell us the two failure patterns that matter are oval wear in the body and loosening of the retainer. 207-939-5120 addresses both: the body diameter is held tight to the tooth bore, and the retainer groove is cut after heat treatment so its width does not change when the pin is hardened.
The numbers listed below are the references we ship against most often for this size. They are supplied as compatibility information only, so the buyer can confirm the match against the machine serial or the old part.
Regular sizes are held in stock for shipment within 3-7 working days. Non stock sizes and OEM production run 20-25 days from drawing confirmation. Minimum order 10 pieces per size, mixed sizes allowed.
| Reference No. | 207-939-5120 |
| Part Category | Adapter Pin |
| Body Material | 40Cr Alloy Steel |
| Hardness Range | HRC 48-52 |
| Pin Size (Dia) | 50 mm |
| Pin Size (Length) | 280 mm |
| Unit Weight | 2.10 kg |
| Fits Machine Class | 30 Ton Excavator |
| Finish Type | Painted Golden |
| Working Application | limestone quarry and cement plant feed |
| Warranty Term | 6 months against casting and heat treatment defects |
| MOQ | 10 pieces |
| Export Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 207-939-5120 | Primary number |
| 205-939-7120 | Interchange reference, verify against sample before ordering |
| 939-5120 | Interchange reference, verify against sample before ordering |
| PC300 series | Interchange reference, verify against sample before ordering |
Pins are oiled against transit rust, individually wrapped, and labelled with the part number and lot. Cartons are export grade corrugated, palletised and fumigation free. Nothing in the pack carries a third party brand, logo or artwork, so the goods can be resold under your own label. Loading is from Ningbo or Guangzhou, with CIF and DDP quotes available.
Can you produce from our drawing?
Yes. Send a drawing or sample and we will confirm material, tolerance and heat treatment, then quote for OEM production with your part number marked.
What is the lead time for 500 pieces?
Stock sizes ship in 3-7 days. Made to order quantities of 500 pieces run about 20-25 days after drawing confirmation and deposit.
How do you control hardness?
Every heat is checked by spectrometer, then pins are sampled for Rockwell hardness at the head, body and groove. 207-939-5120 is held within HRC 48-52.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.