195-78-7130, Mining Bucket Tooth Pin, 60 x 320mm, HRC 50-55. Supplied neutral packed and laser marked, ready for distributors who resell under their own label. Standard fit for 40 Ton Excavator buckets in open pit mining and ore loading.
At 40 ton class the pin becomes a structural component. Ore loading produces continuous high amplitude load, and fatigue rather than wear governs life. 195-78-7130 is a 60 mm body in 42CrMo at HRC 50-55, produced with a generous groove radius to keep stress concentration low. This is our heaviest stock pin and it is inspected piece by piece, not by sample.
Contractors running 40 Ton Excavator machines in open pit mining and ore loading tell us the two failure patterns that matter are oval wear in the body and loosening of the retainer. 195-78-7130 addresses both: the body diameter is held tight to the tooth bore, and the retainer groove is cut after heat treatment so its width does not change when the pin is hardened.
The numbers listed below are the references we ship against most often for this size. They are supplied as compatibility information only, so the buyer can confirm the match against the machine serial or the old part.
Regular sizes are held in stock for shipment within 3-7 working days. Non stock sizes and OEM production run 20-25 days from drawing confirmation. Minimum order 10 pieces per size, mixed sizes allowed.
195-78-7130 is dimensioned as a tooth pin for 40 Ton Excavator buckets working in open pit mining and ore loading. The table below lists the primary number and the interchange references we ship against most often. Where a machine has been re-pinned or the bucket rebuilt, always check the bore diameter and groove position on the old part before ordering.
Two dimensions decide whether a pin lasts a month or a season: body diameter against the tooth bore, and groove width against the retainer. We hold both on our own machining line rather than buying finished pins on the open market, so a repeat order keeps the same fit as the first shipment.
Replace when the body shows a step of more than 1 mm, when the groove has widened enough for the retainer to rotate, or when the head shows cracks. Running a worn pin transfers wear into the tooth bore and adapter, which is a far more expensive repair.
| Part Number | 195-78-7130 |
| Product Type | Tooth Pin |
| Material | 42CrMo Alloy Steel |
| Hardness | HRC 50-55 |
| Pin Diameter | 60 mm |
| Pin Length | 320 mm |
| Net Weight | 3.20 kg |
| Machine Class | 40 Ton Excavator |
| Surface Finish | Black Oxide |
| Application | open pit mining and ore loading |
| Warranty | 6 months against casting and heat treatment defects |
| Minimum Order | 10 pieces |
| Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 195-78-7130 | Primary number |
| 195-78-7131 | Interchange reference, verify against sample before ordering |
| 208-70-14152 pin | Interchange reference, verify against sample before ordering |
| PC400 series | Interchange reference, verify against sample before ordering |
Oiled and wrapped pins, part number and lot on the label, export corrugated carton, fumigation free pallet. No third party brand, logo or artwork appears on the product or the packaging. Shipments load from Ningbo or Guangzhou, and we quote CIF or DDP where the buyer prefers a landed price.
Which surface finish should I choose?
Black oxide suits most dry abrasive conditions, zinc plating suits wet or coastal sites, painted golden finish is common for mini and mid size machines. Tell us the working environment and we will advise.
Do you supply pins for loaders as well?
Yes, we produce excavator, loader and backhoe bucket pins and retainers, from mini class up to 40 ton mining class.
How are the pins marked?
The part number is laser marked on the head. No third party brand name or logo is applied at any stage.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.