This page covers 61N8-31310, a tooth pin for 22 Ton Excavator buckets. Body material is 40Cr Alloy Steel at HRC 48-52, pin size 40 x 240mm, net weight 1.25 kg. Typical duty is road construction and asphalt milling spoil, where abrasive fines and shock loading attack the pin groove first.
Road construction work puts machines in dust, millings and rain, often on the same shift. Corrosion in the tooth bore is as much a problem as wear, so 61N8-31310 is supplied zinc plated. The 40 mm body is held to a tight diameter so plated pins still enter the bore without forcing, which matters when a crew is re-pinning in the field without a press.
Excavator Bucket Tooth Pin are often quoted by part number alone, but the working environment decides the right version. For road construction and asphalt milling spoil, 61N8-31310 in 40Cr Alloy Steel at HRC 48-52 is the standard recommendation. For wet or coastal sites choose zinc plating, and for high shock rock work ask about our deeper case hardness option.
61N8-31310 ships as a tooth pin: 40 x 240mm pin, 1.25 kg, plus the matching retainer. Neutral carton, part number label, no third party branding anywhere in the pack.
Fitting a retainer from a different series, hammering the pin in dry, or reusing a stretched retainer are the three causes we see most often in warranty claims. All three are avoidable with a two minute check at installation.
Contractors running 22 Ton Excavator machines in road construction and asphalt milling spoil tell us the two failure patterns that matter are oval wear in the body and loosening of the retainer. 61N8-31310 addresses both: the body diameter is held tight to the tooth bore, and the retainer groove is cut after heat treatment so its width does not change when the pin is hardened.
The numbers listed below are the references we ship against most often for this size. They are supplied as compatibility information only, so the buyer can confirm the match against the machine serial or the old part.
Regular sizes are held in stock for shipment within 3-7 working days. Non stock sizes and OEM production run 20-25 days from drawing confirmation. Minimum order 10 pieces per size, mixed sizes allowed.
| Reference No. | 61N8-31310 |
| Part Category | Tooth Pin |
| Body Material | 40Cr Alloy Steel |
| Hardness Range | HRC 48-52 |
| Pin Size (Dia) | 40 mm |
| Pin Size (Length) | 240 mm |
| Unit Weight | 1.25 kg |
| Fits Machine Class | 22 Ton Excavator |
| Finish Type | Zinc Plated |
| Working Application | road construction and asphalt milling spoil |
| Warranty Term | 6 months against casting and heat treatment defects |
| MOQ | 10 pieces |
| Export Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 61N8-31310 | Primary number |
| 61Q6-31310 | Interchange reference, verify against sample before ordering |
| R220 series | Interchange reference, verify against sample before ordering |
| E161-3035 | Interchange reference, verify against sample before ordering |
Standard export packing: oiled pin, inner wrap, part number label, corrugated carton, pallet. Neutral presentation throughout, no third party brand or logo anywhere in the shipment. Port of loading is Ningbo or Guangzhou; we can also quote CIF and DDP so the landed cost is clear before you commit.
Can you send a sample before the bulk order?
Yes. Sample pins for stock sizes can be sent by express, freight collect, so you can verify fit and hardness before committing to volume.
What is the smallest order you accept?
10 pieces per size. Below that the per unit freight cost usually does not justify the shipment.
Do you offer a fitment drawing?
Yes, on request we provide a dimensional sketch of 61N8-31310 with diameter, length and groove position for your engineering check.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.