2713-9038 Bucket Tooth Pin Retainer, 45 x 260mm, 42CrMo Alloy Steel, HRC 50-54. This is the pin used on 22 Ton Excavator buckets in general earthmoving and site preparation. Buyers replace it as a scheduled wear item, so repeatability of dimension and hardness matters more than a single low price.
Site preparation machines work across mixed ground: topsoil, rubble, old foundations. That mix produces both abrasion and impact, which is why 2713-9038 uses 42CrMo at HRC 50-54 rather than a plain carbon grade. At 45 mm the pin has enough section for heavy breakout, and the matched retainer is packed in the same carton so a crew never installs a new pin with an old lock.
2713-9038 is dimensioned as a pin and retainer for 22 Ton Excavator buckets working in general earthmoving and site preparation. The table below lists the primary number and the interchange references we ship against most often. Where a machine has been re-pinned or the bucket rebuilt, always check the bore diameter and groove position on the old part before ordering.
Two dimensions decide whether a pin lasts a month or a season: body diameter against the tooth bore, and groove width against the retainer. We hold both on our own machining line rather than buying finished pins on the open market, so a repeat order keeps the same fit as the first shipment.
Replace when the body shows a step of more than 1 mm, when the groove has widened enough for the retainer to rotate, or when the head shows cracks. Running a worn pin transfers wear into the tooth bore and adapter, which is a far more expensive repair.
Repeatable fit. 2713-9038 is machined to the same drawing on every batch, so a second order drops into the same bore without reaming or shimming.
Hardness matched to duty. HRC 50-54 in 42CrMo Alloy Steel for general earthmoving and site preparation. Too hard and the pin cracks at the groove, too soft and it wears oval within weeks. This grade is the balance point for 22 Ton Excavator buckets.
Groove geometry. The retainer seat is machined after heat treatment, not before, which keeps groove width stable and stops the retainer working loose.
Traceable lots. Part number laser marked, lot identified on the carton, inspection report on request. Useful when you supply fleets under contract.
Pin size 45 x 260mm, weight 1.60 kg, finish black oxide, primary number 2713-9038, machine class 22 Ton Excavator, application general earthmoving and site preparation.
Most of our distributor customers combine this number with teeth, adapters and retainers in a single container. Send the full list and we will confirm weights, carton counts and a single FOB price for the mixed load.
| Part Number | 2713-9038 |
| Product Type | Pin and Retainer |
| Material | 42CrMo Alloy Steel |
| Hardness | HRC 50-54 |
| Pin Diameter | 45 mm |
| Pin Length | 260 mm |
| Net Weight | 1.60 kg |
| Machine Class | 22 Ton Excavator |
| Surface Finish | Black Oxide |
| Application | general earthmoving and site preparation |
| Warranty | 6 months against casting and heat treatment defects |
| Minimum Order | 10 pieces |
| Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 2713-9038 | Primary number |
| 2713-9037 | Interchange reference, verify against sample before ordering |
| DX225 series | Interchange reference, verify against sample before ordering |
| K1036573 | Interchange reference, verify against sample before ordering |
Pins are oiled against transit rust, individually wrapped, and labelled with the part number and lot. Cartons are export grade corrugated, palletised and fumigation free. Nothing in the pack carries a third party brand, logo or artwork, so the goods can be resold under your own label. Loading is from Ningbo or Guangzhou, with CIF and DDP quotes available.
Does the price include the retainer?
The quoted price covers the pin and retainer kit as described. Volume pricing from 200 pieces and mixed container loading are available.
What happens if a pin fails early?
Report the lot number and photos. Confirmed casting or heat treatment defects are replaced free within the 6 month warranty period.
Can you supply other numbers in the same shipment?
Yes. Most buyers load 5 to 15 part numbers per container. Send your list and we will consolidate the order and confirm total weight and volume.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.