The 09244-03036 is a lock pin for 30 Ton Excavator buckets, produced in our own foundry and machining line from 40Cr Alloy Steel and hardened to HRC 48-52. It is built for granite quarry bench digging, where a pin that wears oval or cracks at the groove stops the machine and costs a shift.
Granite bench work combines abrasion with repeated high load breakout at a shallow bucket angle. 09244-03036, a 36 mm lock pin through hardened to HRC 48-52, is specified by quarry operators who were previously replacing softer pins twice a season. The section size is deliberately generous so that groove wear, not body bending, becomes the limiting factor.
In granite quarry bench digging the pin does not simply rotate in a clean bore. Grit enters the joint, the retainer groove takes repeated side load, and the pin body sees a mix of abrasion and impact. 09244-03036 is dimensioned for that duty: 36 mm body, 200 mm overall length, 0.88 kg net weight, 40Cr Alloy Steel through the section with HRC 48-52 after heat treatment.
Each heat is checked by spectrometer before casting. Pins are then hardened and tempered to HRC 48-52, and the groove is machined after heat treatment so the retainer seats without play. Head, body and groove are hardness tested on a sampling basis, and the lot report can travel with the shipment.
Standard finish is black oxide. It slows corrosion in the bore and keeps the pin free during the next tooth change. For wet, coastal or high humidity sites ask for zinc plating instead.
Drive the pin in with a soft faced hammer, never a steel drift directly on the head. Seat the retainer fully, then check for movement by hand. Replace pin and retainer together, because a worn retainer will hammer a new pin loose within days.
Excavator Bucket Lock Pin are often quoted by part number alone, but the working environment decides the right version. For granite quarry bench digging, 09244-03036 in 40Cr Alloy Steel at HRC 48-52 is the standard recommendation. For wet or coastal sites choose zinc plating, and for high shock rock work ask about our deeper case hardness option.
09244-03036 ships as a lock pin: 36 x 200mm pin, 0.88 kg, plus the matching retainer. Neutral carton, part number label, no third party branding anywhere in the pack.
Fitting a retainer from a different series, hammering the pin in dry, or reusing a stretched retainer are the three causes we see most often in warranty claims. All three are avoidable with a two minute check at installation.
| P/N | 09244-03036 |
| Item Type | Lock Pin |
| Steel Grade | 40Cr Alloy Steel |
| Hardness | HRC 48-52 |
| Diameter | 36 mm |
| Overall Length | 200 mm |
| Weight | 0.88 kg |
| Class Fitment | 30 Ton Excavator |
| Coating | Black Oxide |
| Duty | granite quarry bench digging |
| Warranty | 6 months against casting and heat treatment defects |
| Minimum Order Quantity | 10 pieces |
| Packing Method | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 09244-03036 | Primary number |
| 09244-03030 | Interchange reference, verify against sample before ordering |
| 207-70-14151 pin | Interchange reference, verify against sample before ordering |
| PC300 series | Interchange reference, verify against sample before ordering |
Each pin is oiled, wrapped and part number labelled, then packed in export grade corrugated cartons on a fumigation free pallet. Packing is neutral: no third party brand name, logo or artwork is printed on the product, the label or the carton. We ship FOB Ningbo or Guangzhou, and can quote CIF or DDP depending on destination.
How do I confirm the pin fits my machine?
Send the machine model, bucket part number or a photo of the old pin with its length and diameter. We will cross check the 09244-03036 against our fitment data before you order.
Is the pin supplied with the retainer?
Yes, 09244-03036 is supplied as a lock pin kit. If you only need the pin or only the retainer, state this in the inquiry and we will quote separately.
What is the packing like?
Neutral carton with no third party logo. Each pin is wrapped and part number labelled, and the carton is export grade corrugated suitable for sea freight.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.