20X-70-14160, Mini Excavator Bucket Pin, 25 x 140mm, HRC 45-50. Supplied neutral packed and laser marked, ready for distributors who resell under their own label. Standard fit for 7 Ton Excavator buckets in landscaping and light residential excavation.
On 7 ton class machines the bucket is often swapped two or three times a day for a breaker, auger or grading bucket. Pin life is less of an issue than pin handling, so 20X-70-14160 is dimensioned for quick, repeatable installation with a painted golden finish that makes inspection easy. The 25 mm body and 140 mm length suit standard mini bucket ears.
Repeatable fit. 20X-70-14160 is machined to the same drawing on every batch, so a second order drops into the same bore without reaming or shimming.
Hardness matched to duty. HRC 45-50 in 45# Carbon Steel for landscaping and light residential excavation. Too hard and the pin cracks at the groove, too soft and it wears oval within weeks. This grade is the balance point for 7 Ton Excavator buckets.
Groove geometry. The retainer seat is machined after heat treatment, not before, which keeps groove width stable and stops the retainer working loose.
Traceable lots. Part number laser marked, lot identified on the carton, inspection report on request. Useful when you supply fleets under contract.
Pin size 25 x 140mm, weight 0.35 kg, finish painted golden, primary number 20X-70-14160, machine class 7 Ton Excavator, application landscaping and light residential excavation.
Most of our distributor customers combine this number with teeth, adapters and retainers in a single container. Send the full list and we will confirm weights, carton counts and a single FOB price for the mixed load.
Contractors running 7 Ton Excavator machines in landscaping and light residential excavation tell us the two failure patterns that matter are oval wear in the body and loosening of the retainer. 20X-70-14160 addresses both: the body diameter is held tight to the tooth bore, and the retainer groove is cut after heat treatment so its width does not change when the pin is hardened.
The numbers listed below are the references we ship against most often for this size. They are supplied as compatibility information only, so the buyer can confirm the match against the machine serial or the old part.
Regular sizes are held in stock for shipment within 3-7 working days. Non stock sizes and OEM production run 20-25 days from drawing confirmation. Minimum order 10 pieces per size, mixed sizes allowed.
| Reference No. | 20X-70-14160 |
| Part Category | Bucket Pin |
| Body Material | 45# Carbon Steel |
| Hardness Range | HRC 45-50 |
| Pin Size (Dia) | 25 mm |
| Pin Size (Length) | 140 mm |
| Unit Weight | 0.35 kg |
| Fits Machine Class | 7 Ton Excavator |
| Finish Type | Painted Golden |
| Working Application | landscaping and light residential excavation |
| Warranty Term | 6 months against casting and heat treatment defects |
| MOQ | 10 pieces |
| Export Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 20X-70-14160 | Primary number |
| 20X-70-14151 | Interchange reference, verify against sample before ordering |
| PC60 series | Interchange reference, verify against sample before ordering |
| 20X-70-23161 | Interchange reference, verify against sample before ordering |
Oiled and wrapped pins, part number and lot on the label, export corrugated carton, fumigation free pallet. No third party brand, logo or artwork appears on the product or the packaging. Shipments load from Ningbo or Guangzhou, and we quote CIF or DDP where the buyer prefers a landed price.
Which surface finish should I choose?
Black oxide suits most dry abrasive conditions, zinc plating suits wet or coastal sites, painted golden finish is common for mini and mid size machines. Tell us the working environment and we will advise.
Do you supply pins for loaders as well?
Yes, we produce excavator, loader and backhoe bucket pins and retainers, from mini class up to 40 ton mining class.
How are the pins marked?
The part number is laser marked on the head. No third party brand name or logo is applied at any stage.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.