7T3402 is our production pin and retainer for 25 Ton Excavator machines. Machined from 42CrMo Alloy Steel, heat treated to HRC 50-55, finished black oxide. It is selected by contractors working in rock ripping and heavy breakout work who need a pin that holds its diameter through the full service interval.
Ripping puts a high breakout force through a narrow tooth, and the pin is the joint that has to keep that force centred. At 40 mm diameter and HRC 50-55, 7T3402 is the harder end of our range, intended for machines that spend most of the shift in rock rather than mixed soil. The retainer is supplied matched to the groove because a mismatched retainer will fail long before the pin does.
7T3402 is dimensioned as a pin and retainer for 25 Ton Excavator buckets working in rock ripping and heavy breakout work. The table below lists the primary number and the interchange references we ship against most often. Where a machine has been re-pinned or the bucket rebuilt, always check the bore diameter and groove position on the old part before ordering.
Two dimensions decide whether a pin lasts a month or a season: body diameter against the tooth bore, and groove width against the retainer. We hold both on our own machining line rather than buying finished pins on the open market, so a repeat order keeps the same fit as the first shipment.
Replace when the body shows a step of more than 1 mm, when the groove has widened enough for the retainer to rotate, or when the head shows cracks. Running a worn pin transfers wear into the tooth bore and adapter, which is a far more expensive repair.
Bucket Tooth Pin Retainer are often quoted by part number alone, but the working environment decides the right version. For rock ripping and heavy breakout work, 7T3402 in 42CrMo Alloy Steel at HRC 50-55 is the standard recommendation. For wet or coastal sites choose zinc plating, and for high shock rock work ask about our deeper case hardness option.
7T3402 ships as a pin and retainer: 40 x 250mm pin, 1.35 kg, plus the matching retainer. Neutral carton, part number label, no third party branding anywhere in the pack.
Fitting a retainer from a different series, hammering the pin in dry, or reusing a stretched retainer are the three causes we see most often in warranty claims. All three are avoidable with a two minute check at installation.
| Part Number | 7T3402 |
| Product Type | Pin and Retainer |
| Material | 42CrMo Alloy Steel |
| Hardness | HRC 50-55 |
| Pin Diameter | 40 mm |
| Pin Length | 250 mm |
| Net Weight | 1.35 kg |
| Machine Class | 25 Ton Excavator |
| Surface Finish | Black Oxide |
| Application | rock ripping and heavy breakout work |
| Warranty | 6 months against casting and heat treatment defects |
| Minimum Order | 10 pieces |
| Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 7T3402 | Primary number |
| 7T3403 | Interchange reference, verify against sample before ordering |
| 9J2258 | Interchange reference, verify against sample before ordering |
| J350 series | Interchange reference, verify against sample before ordering |
Each pin leaves the line oiled, wrapped and labelled, consolidated into export corrugated cartons on a fumigation free pallet. Packing is deliberately neutral, with no third party brand name, logo or printed artwork, which keeps the goods clean for resale. FOB Ningbo or Guangzhou as standard, CIF and DDP on request.
Can you produce from our drawing?
Yes. Send a drawing or sample and we will confirm material, tolerance and heat treatment, then quote for OEM production with your part number marked.
What is the lead time for 500 pieces?
Stock sizes ship in 3-7 days. Made to order quantities of 500 pieces run about 20-25 days after drawing confirmation and deposit.
How do you control hardness?
Every heat is checked by spectrometer, then pins are sampled for Rockwell hardness at the head, body and groove. 7T3402 is held within HRC 50-55.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.