8E6358 Excavator Bucket Tooth Pin, 35 x 210mm, 45# Carbon Steel, HRC 45-50. This is the pin used on 30 Ton Excavator buckets in quarry face loading and shot rock handling. Buyers replace it as a scheduled wear item, so repeatability of dimension and hardness matters more than a single low price.
Shot rock loading is a shock load application. The bucket strikes the muck pile with the teeth at an angle, and the pin absorbs the resulting shear before the force reaches the adapter. 8E6358 is produced from 45# carbon steel at HRC 45-50 rather than a harder grade, because at 35 mm section a harder pin cracks at the groove before it wears out. Toughness over pure hardness is the correct trade here.
Excavator Bucket Tooth Pin are often quoted by part number alone, but the working environment decides the right version. For quarry face loading and shot rock handling, 8E6358 in 45# Carbon Steel at HRC 45-50 is the standard recommendation. For wet or coastal sites choose zinc plating, and for high shock rock work ask about our deeper case hardness option.
8E6358 ships as a tooth pin: 35 x 210mm pin, 0.95 kg, plus the matching retainer. Neutral carton, part number label, no third party branding anywhere in the pack.
Fitting a retainer from a different series, hammering the pin in dry, or reusing a stretched retainer are the three causes we see most often in warranty claims. All three are avoidable with a two minute check at installation.
Repeatable fit. 8E6358 is machined to the same drawing on every batch, so a second order drops into the same bore without reaming or shimming.
Hardness matched to duty. HRC 45-50 in 45# Carbon Steel for quarry face loading and shot rock handling. Too hard and the pin cracks at the groove, too soft and it wears oval within weeks. This grade is the balance point for 30 Ton Excavator buckets.
Groove geometry. The retainer seat is machined after heat treatment, not before, which keeps groove width stable and stops the retainer working loose.
Traceable lots. Part number laser marked, lot identified on the carton, inspection report on request. Useful when you supply fleets under contract.
Pin size 35 x 210mm, weight 0.95 kg, finish black oxide, primary number 8E6358, machine class 30 Ton Excavator, application quarry face loading and shot rock handling.
Most of our distributor customers combine this number with teeth, adapters and retainers in a single container. Send the full list and we will confirm weights, carton counts and a single FOB price for the mixed load.
| Reference No. | 8E6358 |
| Part Category | Tooth Pin |
| Body Material | 45# Carbon Steel |
| Hardness Range | HRC 45-50 |
| Pin Size (Dia) | 35 mm |
| Pin Size (Length) | 210 mm |
| Unit Weight | 0.95 kg |
| Fits Machine Class | 30 Ton Excavator |
| Finish Type | Black Oxide |
| Working Application | quarry face loading and shot rock handling |
| Warranty Term | 6 months against casting and heat treatment defects |
| MOQ | 10 pieces |
| Export Packing | Neutral carton, no third party brand or logo printed |
| Compatible Reference No. | Notes |
| 8E6358 | Primary number |
| 8E6359 | Interchange reference, verify against sample before ordering |
| 6Y2527 | Interchange reference, verify against sample before ordering |
| J300 series | Interchange reference, verify against sample before ordering |
Pins are oiled against transit rust, individually wrapped, and labelled with the part number and lot. Cartons are export grade corrugated, palletised and fumigation free. Nothing in the pack carries a third party brand, logo or artwork, so the goods can be resold under your own label. Loading is from Ningbo or Guangzhou, with CIF and DDP quotes available.
Does the price include the retainer?
The quoted price covers the tooth pin kit as described. Volume pricing from 200 pieces and mixed container loading are available.
What happens if a pin fails early?
Report the lot number and photos. Confirmed casting or heat treatment defects are replaced free within the 6 month warranty period.
Can you supply other numbers in the same shipment?
Yes. Most buyers load 5 to 15 part numbers per container. Send your list and we will consolidate the order and confirm total weight and volume.
Send your machine model, the number you are replacing and the quantity per size. You will receive a quotation with FOB price, carton count, total weight and lead time within 24 hours on working days. Sample pins for stock sizes can be arranged before the bulk order.