6I6603 Excavator Part Construction Machinery Part Mini Excavator Part Hydraulic Excavator Part Excavator

6I6603  Rock Tip — Product Description

The 6I6603 is a heavy-duty ripper tooth produced for tractors. It is cast in our own foundry, heat treated in house and checked dimensionally before packing, which gives maintenance crews a consistent wear part instead of a mixed bag of aftermarket tips.

Key Features

• Smooth cast surface lowers soil adhesion in wet ground
• Uniform 50-55 HRC hardness held from surface to core
• Available in penetration, chisel and tiger profiles
• Temper cycle logged so hardness repeatability can be audited later
• Consistent pour weight batch to batch keeps machine balance stable

Factory Service and Support

• Third-party inspection accepted — SGS, BV or your own QC agent are welcome in the plant before shipment.
• Factory-direct pricing with no intermediate margin, quoted per piece or per ton depending on how you buy.
• After-sales wear analysis — send photos of worn teeth and we advise on profile or material change.
• 7-15 working day lead time on standard items; tooling-based custom profiles quoted separately.
• Flexible terms: T/T, L/C, PayPal, Western Union; 30% deposit, balance against copy of B/L for established buyers.

Application

Typical duty: bulk ripping of hard pan, shale, sandstone and blasted limestone; also used as a wear cap on multi-shank rippers where side wear is the main failure mode.

Technical Specifications

Packing and Delivery

Packing is decided by weight: light tips go in double-wall cartons, heavy tips in woven bags on pallets with a plywood cap. Every carton carries the part number, heat number and quantity so warehouse receiving stays simple.

Inspection Before Shipment

Every batch is hardness tested and dimensionally audited against the drawing. Photos of the packed goods, carton marks and the HRC report are sent to you before the container leaves the plant.

Fitting Notes 6I6603

Nose width 45 mm, pin hole 26 mm, unit weight 10.0 kg and overall length 280 mm. Supplied pin and retainer as standard, normalise plus temper treatment, 60 pcs per pallet, reference wear life around 350 hours in medium abrasive rock. Lead time 10-20 working days, MOQ 100 pieces.

Next Step

Share a photo of the worn tooth on the shank and we will cross-reference it to this part number, then quote with freight to your nearest port.