9W4552 RIPPER TIP fits, Bulldozer Ripper Shank Bucket Tooth

9W4552  RIPPER TIP fits— Product Description

In  ripping duty the 9W4552 General Purpose Tip is the part that sets your cost per ton. At 48.7 kg and 330 mm long it keeps the original shank load pattern while giving a harder 46-50 HRC wear surface than mild aftermarket tips.

Key Features

• Dimensional check against the original drawing before packing
• Tight bore tolerance on the pin hole for a rattle-free fit
• Standard pin and retainer fixing without shank modification
• Chamfered leading edge shortens break-in time on site
• Symmetrical wear pattern lets the tooth be flipped once before scrap

Technical Specifications

Next Step

Share a photo of the worn tooth on the shank and we will cross-reference it to this part number, then quote with freight to your nearest port.

Manufacturer Advantages

• Integrated production: induction melting, sand casting, normalising, quenching and tempering, shot blasting and CNC finishing under one roof.
• OEM/ODM ready: send a drawing or a worn sample and we reverse-engineer a replacement profile.
• Predictable logistics with 7-15 day production plus consolidated LCL options for mixed spare-part orders.
• Hardness verified per batch with a documented HRC report shipped alongside the goods.
• ISO 9001:2015 certified process control from incoming scrap sorting to final dimensional audit.
• Long-term partnership pricing for distributors who carry stock and forecast quarterly.

Fitting Notes 9W4552

Nose width 52 mm, pin hole 35 mm, unit weight 16.5 kg and overall length 330 mm. Supplied pin and rubber lock as standard, isothermal quench treatment, 80 pcs per pallet, reference wear life around 450 hours in medium abrasive rock. Lead time 15-25 working days, MOQ 50 pieces.

Application

Typical duty: bulk ripping of hard pan, shale, sandstone and blasted limestone; also used as a wear cap on multi-shank rippers where side wear is the main failure mode.

Inspection Before Shipment

Every batch is hardness tested and dimensionally audited against the drawing. Photos of the packed goods, carton marks and the HRC report are sent to you before the container leaves the plant.

Packing and Delivery

Tooth tips are individually wrapped and separated by cardboard to protect the cutting edge in transit, packed in bags or cartons depending on size, then palletised and strapped for forklift handling. Custom packing specifications are followed exactly as written.